kublerfrance | level transmitters, indicators | kublerfrance Vietnam

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong

D5 KDC Miễu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh

Tell : 0915.980.479

        0162.999.888.7

Email : vinhmv.pitesco@gmail.com

Website:   www.pitesvietnam.com                    

                    www.sensor-encoder.com

Level transmitters - Indicators

TN3SA:
RESISTANCE SIGNAL CONVERTER
- 4,20 mA
- 3 alarms
- DIN panel mount

PAX-D:
DIGITAL INDICATOR
- front panel mounting
- programmable
- protection IP 65

KF4S:
RESISTANCE SIGNAL CONVERTER
- 4,20 mA
- 4 alarms
- DIN panel mounting

A48, A96, A144:
ANALOG PANEL INDICATOR
liter graduation
others on request

Level Transmitter R/I 4.20 2C:
- current signal 4...20 mA
- 2-wire version
- supply voltage 12 to 30 VDC
- level sensor's head mounted

Digital Level Transmitter:

5343A Standard version

5343B ATEX version

Digital Level TransmitterHART protocole: Inherent Safety suitable
Level sensor's head mounted.

5335A Standard version

5335B ATEX version

Digital Level TransmitterFIELDBUS protocole: Inherent Safety suitable

5350A Standard version

5350B ATEX version

Digital Level TransmitterTEH / TLEH:
HART protocole: Inherent Safety suitable
Level sensor's head mounted.

TEH Standard version

TLEH ATEX version

Float Switches, KSR-Kuebler Vietnam, AFV DN 100

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong

D5 KDC Miễu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh

Tell : 0915.980.479

        0162.999.888.7

Email : vinhmv.pitesco@gmail.com

FLOAT SWITCHES Vertical Float switches 

Working principleA float with a built-in magnet moves with the surface level of the medium being measured along a guide tube in which one or more reed switches are installed. The magnet actuates the contacts at the pre-set positions thus allowing the monitoring of individual filling levels
 
Area of application
Suitable for almost all liquids.
Special versions can carry out interface level measurements.
 
Temperature
-196 °C to 250 °C (up to 350 °C available as an option)
 
PressureFrom vacuum to 40 bar (4 MPa). (Versions for higher pressures available.)
 
Materials
Stainless-steel, Titanium, Hastelloy, PVC, polypropylene, PVDF, PTFE, Teflon and E - CTFE coatings.
 
Output
S' Switch: closes as the float rises
O' Switch: opens as the float rises
U' Switch: changeover contact (SPDT - simple changeover switch).
Contact protection relays and controllers are available.

Fitting and Types
Flange mounted or screw-in thread, with installation from below or above. For the angled version the inlet is at the side. Several switching points are possible for each magnetic float switch (standard version: up to 8; more on enquiry). Length of the slider tube up to 12,000 mm in one piece and up to 25,000 mm made from several parts. Versions are available for the foodstuffs industry.

Horizontal magnetic float switches 

Working principle
A float is fixed to a lever mounted so that it can rotate, and moves with the surface level of the medium being measured. A magnet fitted to the other end of the lever then activates a reed switch inside the housing.
 
Area of applicationSuitable for almost all liquids.
 
Temperature
-196 °C to 250 °C (up to 350 °C available as an option)
 
PressureFrom vacuum to 40 bar (4 MPa). (Versions for higher pressures available.)
 
Materials
Stainless-steel, brass, titanium, tantalum, Hastelloy, PVC, polypropylene, PVDF, PTFE, and E - CTFE coated floats.
 
Output
Generally fitted with changeover contacts. Other switch functions are available.
 

FittingAt the side: Flange mounted or screw-in thread.